Sector PCD wire drawing moulds
Product Instruction:
It can be widely applied to the stretching and reshaping of metal wires and pipes such as gold, silver, copper, iron, aluminum, stainless steel and copper clad steel wire.
The minimum square eye is 0.20×0.20 mm, the minimum square eye is 0.08×0.30 mm, the semi-circle eye is 0.25×0.5mm, the triangle eye is 0.2x0.5mm, and the sharp angle is 0.01. Mm, the tolerance is controlled at ±0.001mm, and elliptical, hexagonal and singular eye lines can be produced according to customer needs.
Product feature:
Higher drawing force
Smaller fines requires more filtration
Be damaged by temperature above 700 ℃
Wire surface condition less than from natural diamond